o
Circuit breaker integrated in controller
o
Single receptacle is included, dual receptacle is optional
•
Enclosure
o
Aluminum, with internal cooling fan (not splash proof)
o
Front panel includes Wi-Fi antenna, temperature probe receptacle(s), I/O connector,
I/O power, power switch
o
Rear panel includes pass-through connectors for power and pump/accessory wires
and circuit breaker
o
Aluminum heat sink (on versions so equipped)
o
Rubber feet on bottom (optional DIN rail mounting kit)
o
Mounting: horizontal or vertical (power cords down)
o
Dimensions 290 x 170 x 100 mm (11.4 x 6.7 x 3.9 inches) L
x W x H, excluding wires
•
Temperature Probe(s)
o
100 mm (4 inch) length, 6 mm (1/4 inch) diameter probe, with 3 m (10′ / 120 inches)
cord and right-angle plug
o
Universal probe design, allows for brewery integration via compression fittings (not
included)
o
Probes are waterproof (can be submerged) and use shielded cable for noise
reduction
o
1-wire technology, allows for up to 10 probes simultaneously plugged in (requires
separate adapter, not included)
o
1 probe included with single vessel controller, 2 probes with dual vessel controller
o
Temperature range -55°C to +125°C (-
67°F to +257°F)
o
±0.5°C (1°F) accuracy from -10°C to +85°C (14°F to 185°F)
•
BruControl Interface
o
ESP32 based microcontroller with Wi-Fi and external antenna
o
Firmware software upgradeable over-the-air
•
Solid State Relay Option
o
Standard (binary) SSR for duty-cycle type modulated control
o
Optional proportional SSR for step-less type modulated control
•
Cooling configurations
o
External, passive heat sink option (required for proportional SSR)
o
Internal, active (fan cooled) option
•
Power Switch
o
Latching illuminated circular switch on front panel
o
Interlock design ensures vessel Power Outputs are disconnected from mains power
•
Integrated Input/Output Option
o
17 total I/O
o
12 high current outputs (max limits: 12 amps total, 5 amps per bank, 2 amps per
output)
o
4 inputs (digital or 12-bit analog)
