Should the user need a higher current supply or prefer to power the output drivers with a
different voltage, this jumper needs be disconnected, and output driver pin would be
connected to a discrete power supply. Voltage supplied can range from 5V to 24 VDC. This does
not affect the other channels such as the analog output or the inputs. The limits per high
current driver output pin are 2 amps per driver output pin, 5 amps per driver output pin bank,
and 12 amps total.
Note: The mating I/O and Power Connectors require wires soldered to their pins. This should
only be conducted by someone with adequate experience / skills soldering fine-pitch
electronics. Solder flux is highly recommended to ensure adequate bonding of wires in the
connector solder cups.
The following is a schematic example of Integrated I/O wiring:
