As noted above in Initial Set-Up, the probes are indexed during initial power-up of the UniFlex,
therefore the temperature probes are not hot-swappable. Probes should therefore not be
plugged or unplugged while the UniFlex is powered on.
It is highly recommended that additional temperature probes be purchased from BruControl.
While not recommended, if a user needs to purchase a different probe or create their own, the
connections are as follows:
Inserting probes which are not provided or qualified by BruControl may cause damage to
the UniFlex as the VDD output is not fused.
DIN Rail Mounting
The DIN Rail Mount option provides the ability to mount the UniFlex to dual 35mm DIN rails.
This prevents the UniFlex from being accidentally moved and facilitates vertical mounting if
desired.
The UniFlex may be mounted horizontally, with the DIN rail clips facing down, or vertically,
with the pigtail power cords hanging down. Do not mount the unit in any other orientation.
The DIN Rail Mount option replaces the four-standard rubber-feet with DIN rail clips. Two
200mm lengths of DIN rails are also included. To use, mount the DIN rails in parallel, 164mm
apart, center-to-center. Then press the UniFlex with DIN rail clips down until all four click in
place. To remove, firmly and slowly pull up on the UniFlex main body lifting on one row of clips
at a time until they disengage.
Troubleshooting
Warranty
A.
Limited Warranty
1.
BruControl LLC warrants to the original purchaser that this product will be free
from manufacturing defects in material and workmanship for a period of one (1)
year from the date of purchase by the customer. Proof of purchase is required.
BruControl LLC’s obligation to repair or replace defective materials or
3: VDD
2: DQ
1: GND
