BRP Ski-doo Tundra Series, Руководство оператора

Страница: 49 / 171

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2010-004-002_a
TYPICAL
1. OFF
2. ON
3. START
Turn key to ON position to allow man-
ual engine starting.
On electric start models, turn key to
START position to engage starter.
Refer to
ENGINE STARTING PROCE-
DURE
in the
BASIC PROCEDURES
section for detailed starting procedure.
8) Choke Lever (550F)
The choke lever has 3-positions.
1
2
3
A06H1KA
1. OFF
2. Position 2
3. Position 3
Refer to
CHOKE APPLICATION
in the
BASIC PROCEDURES section for in-
structions on choke use.
9) Multifunction Switch
(Sport, LT and Extreme)
Multifunction switch is located on the
LH side of handlebar.
mmo2015-007-003_a
1. Headlights dimmer switch
2. Heated grips switch
3. Heated throttle lever switch
4. Electronic reverse button
Electronic Reverse/Start Button
600 ACE and 600 HO E-TEC Models
Press to engage electric starter.
Refer to
ENGINE STARTING PROCE-
DURE
in the
BASIC PROCEDURES
section for detailed starting procedure.
550F and 600 HO E-TEC Models
With engine running, press to engage
the electronic reverse. Refer to
RE-
VERSE (RER™)
in
BASIC PROCE-
DURES
section for procedure.
Headlights Dimmer Switch
Press to select HI or LOW beam.
Lights are automatically ON when the
engine is running.
Heated Grips Switch
NOTE: On 600 ACE and E-TEC mod-
els, the heated grips are enabled above
2000 RPM.
Select the switch position according to
the desired heating intensity to keep
your hands at a comfortable tempera-
ture.
_______________
47