BRP Sea-Doo MOVE I 1250 Long Galvanized/Painted Black, Руководство оператора

Страница: 38 / 68

38
7. Install the dust cover. Tap lightly
on the edges to place the dust
cover.
8. Use a screwdriver and a hammer
to tap the dust cover until it is com-
pletely into the hub and the flange
on the dust cover is tight against
the
hub face. Alternate sides
around the dust cover to avoid any
bending.
9. Repeat on other wheels.
L Liig gh httss
All the lights are built with LEDs (light
emitting diode) and this technology
proved to be reliable. In the unlikely
event they do not work, have them
checked by an authorized Sea-Doo
dealer.
W Wiin ncch h
W Wiin ncch h IIn nssp pe eccttiio on n
Inspect gears, bushings and strap for
wear or damage.
W Wiin ncch h L Lu ub brriicca attiio on n
Apply a thin coat of multipurpose
grease to the gearing teeth and pivot
points. Rotate handle to distribute
grease evenly.
Lubricate ratchet pivot point with light
oil.
JJa acckk
JJa acckk L Lu ub brriicca attiio on n
Clean grease fitting, then lubricate us-
ing multipurpose grease. Rotate han-
dle to distribute grease evenly.
Lubricate handle pivot point and
wheel axle with light oil. Wipe excess
oil and rotate parts to distribute oil
evenly.
1. Grease fitting
W Wo oo od de en n B Bu un nkkss ((iiff E Eq qu uiip pp pe ed d))
Check wooden bunks carpet condition
and wood hardness.
R Ro olllle err B Bu un nkkss ((iiff E Eq qu uiip pp pe ed d))
Check rollers for wear, cracks or
damage.
MAINTENANCE AND INSPECTION PROCEDURES