BRP ROTAX 125 MAX DD2 evo, Инструкция по установке и руководство оператора

Страница: 39 / 72

Installation Instructions 125 MAX DD2 evo
Page 38/70 Edition 09/2016
15. Installation of the intake silencer with integrated air filter
See Fig. 57.
Æ
Install the rubber intake pipe (pos. 5) in a vertical position into the bottom half (pos.
2) of the intake silencer so that the rounded intake openings point outwards.
Æ
Fit the carburetor socket (pos. 7) into the inner side of the silencer (pos. 1) so that
the arrow on the socket points towards the carburetor.
Æ
Install the filter element (pos. 3) with the holder (pos. 4).
Æ
Assemble filter box and filter insert as shown in the following figure. Make sure that
the locking is interlocked properly.
Æ
Apply "Air filter cleaning kit" part no.: 297160 on the filter mat (pos. 3) and squeeze
out surplus oil afterwards.
Æ
Attach the intake silencer with the supplied hose clamps (pos. 8) to the carburetor.
¿
Note: The carburetor socket (pos. 7) is asymmetrical and can be turned so that the best
possible position between carburetor and intake silencer can be achieved.
Æ
Attach the intake silencer to the chassis using the M6 Allen screw with rounded
flange head (pos. 10).
Fig. 57