BRP can-am SPYDER F3 2018 Series, Руководство оператора

Страница: 19 / 41

PRIMARY CONTROLS
rmo2015-008-030_a
1. Brake pedal
2. Footrest
NOTE: When riding, make sure not
to lean your foot on brake pedal. Oth-
erwise, the engine management will
activate the limp home mode to pro-
tect the braking system.
7) Parking Brake Button
The parking brake button is located
on the LH side handlebar. It allows to
engage or release the electric parking
brake.
On SE6 models , there will be a 20 sec-
ond beep sound when stopping the en-
gine while the parking brake is not en-
gaged.
rmo2015-008-040_d
F3 AND F3 S
1. Parking brake button
219001829-001_b
F3 T AND LIMITED
1. Parking brake button
NOTE: To apply or release the parking
brake, the ignition key must be turned
ON.
NOTE: The battery voltage must be
at 11 V minimum to activate the park-
ing brake. If voltage is below 11 V, the
parking brake indicator lamp will turn
ON.
With the vehicle stopped, press the
parking brake button to apply parking
brake. The brake indicator lamp will
flash.
NOTE: The parking brake cannot be
activated when the vehicle is above
10 km/h (6 MPH).
Check that the parking brake is fully en-
gaged. Hold the clutch (on SM6 mod-
els) and rock the vehicle back and forth.
rmo2015-008-040_e
F3 AND F3 S
1. Parking brake ON button
16
______________