Browning BTC-DWC-ATT, Инструкция по эксплуатации

Страница: 3 / 9

WWW.BROWNINGTRAILCAMERAS.COM 4 5 BROWNING TRAIL CAMERAS
BATTERY & SD CARD INSTALLATION
You will need to provide and Install a good quality card. The best
brands of SD cards are Browning branded cards, Sandisk or
Kingston branded cards. Your new camera will accept SD cards
from 8GB-512GB.
Insert your SD card into the SD card slot in the camera.
Release the battery tray by pressing the Battery Eject button. The
tray will eject about 1/2”. With a slight pull, the battery tray will
completely eject.
Install 16 AA Alkaline or Lithium batteries in the battery tray. Make
sure you install the batteries with the correct polarity, following
the markings on the battery tray. For optimal performance we
recommend using Browning branded batteries, Energizer or
Duracell. Slide the battery tray into the closed position.
ANTENNA INSTALLATION
Locate the cellular antenna that is has been packed with your
camera. The antenna is attached to the foam insert on the back
of the camera. Screw the antenna in place on the top of the cam-
era, making sure the small gasket is in place on the camera side
of the antenna adaptor.
CAUTION: Screw the antenna in place
until a snug fit is reached. DO NOT over tighten the antenna,
or damage may occur.
STRIKE FORCE WIRELESS ACCOUNT SET UP
In order to start transmitting pictures from your Browning
Defender Wireless camera, you will need to do a quick account
set up at
WWW.STRIKEFORCEWIRELESS.COM
STEP 1: Simply set up a user name and password, contact information
and select the desired plan package to begin.
STEP 2: On the Services and
Equipment page you will
need to enter the ICCID
and IMEI numbers from your
camera in the ACTIVATE NEW
SUBSCRIPTION fields. The
ICCID and IMEI numbers are
on a label inside of the control panel door of your camera.
If you are activating a camera that operates on the ATT network,
enter your ICCID and IMEI
numbers in the ATT field.
There is a separate
field area to enter your
ICCID and IMEI numbers
for units operating on the
Verizon network.
The SIM card in your camera will be activated within 2-3 minutes.