WWW.BROWNINGTRAILCAMERAS.COM
10
11
BROWNING TRAIL CAMERAS
MULTI SHOT MODE
Single:
This is the default setting. The camera will only take 1 picture
when triggered.
Standard:
The options available are 2 – 8 shots in this mode. The shots
will happen each trigger event in a burst 3 seconds apart.
Rapid Fire:
The options available are 2 – 8 shots in this mode. The
shots will happen each trigger event in a burst with only 0.3 seconds
between each picture.
TEMP UNIT
The temperature units can be displayed in Image Data Strip
in either Fahrenheit or Celsius.
CAMERA NAME
You can add a custom name for the camera. This op-
tion is limited to 10 characters.
IMAGE DATA STRIP
Your trail camera has an information bar that is
printed at the bottom of each photo or video taken. This bar shows:
Temperature, Moon phase, Date, Time and Camera Name.
MOTION DETECTION
The motion detection distance can be adjusted to
either 60ft. or 80ft. ranges.
BATTERY TYPE
To achieve the most accurate battery level reading, the
camera can be adjusted to monitor either Alkaline or Lithium batteries.
TRIGGER SPEED
Your camera can be configured to a custom trigger
speed of Normal (0.7 seconds) or Fast (0.4 seconds). We recommend
Normal for areas where game is moving slowly, such as feeding areas.
The Fast setting is typically used for monitoring trails.
DEFAULT SETTINGS
This selection returns your camera back to the
factory options for each setting.
DELETE ALL
By selecting Delete All, every image on the SD card is
erased permanently. This function also keeps the card formatted to the
trail camera. We suggest using the Delete All function and reformat the
SD card each time it is installed in the camera for use.
IR FLASH POWER
Long Range:
This option has a flash range of 80’ and uses a low glow
infrared flash.
Blur Reduction:
Use this option on trails where game will be traveling
fast for great shots, low glow infrared flash.
Invisible:
Use this option for an invisible flash which cannot be
detected.
SMART IR VIDEO
Smart IR Video is a feature that will allow a daytime
video clip to keep recording as long as the camera detects movement
during filming. If the subject stands still in front of the camera and the
camera does not detect movement, the camera will end the video clip.
The maximum record time for a video clip using this feature is
2 minutes.
SD MANAGEMENT
By turning this option on, the camera will erase the
oldest pictures or videos on the SD card when it becomes full. This
allows for the camera to continue taking pictures or videos if you can’t
get to the field to swap out the SD card.
FW UPGRADE
The Firmware Upgrade option allows you to upgrade your
cameras firmware. If a firmware upgrade is available for your camera
it will be posted on our website, along with detailed instructions for
upgrading.
www.browningtrailcameras.com/customer-service
PLAY BACK
From the cameras Main Menu Play Back can be selected to review the
images and video clips stored on your cameras SD card using the color
TFT display.
Right/Left Arrow Buttons:
Scroll forward and reverse through still im-
ages or video clips.
Up Button:
Access the menu option to delete the current image being
viewed or delete all files on the SD card.
Enter Button:
When the image displayed is the first frame of a video
clip, the Enter Button is used to start and pause the video playback.
Содержание BTC-DWC-ATT
Страница 1: ...CELL CAMERA INSTRUCTION MANUAL ...
