BW1253s User Guide v1.0
Nov. 2013
Page 96 of 180
Save
– save the new route
Cancel
– restore all previous values
Figure 163 – Save New Route
Static route will take effect immediately after click save button.
Network | Attack Countermeasure
To protect BW1253s from outside attack, anti-attack polices can be set here based on network needs.
Figure 164– Attack Countermeasure settings
Anti-DOS
Status
– Enable or disable anti-dos policy for BW1253s. This policy is for TCP DOS attack.
Max Load
– The attack threshold. BW1253s think there is TCP DOS attack and do the
countermeasure if one client’s TCP links exceed this threshold.
Expire(seconds)
– If one client is considered as DOS attacker, BW1253s kicks it out and doesn’t
let it connect again during the time that
Expire
set.
Flow Control
Status
– Enable or disable traffic flow control policy for BW1253s.
Max Load
– The attack throughput threshold.
Duration(seconds)
– if traffic exceeds the value of
Max Load
during the whole time that
Duration
set, BW1253s think there is traffic flow attack and do the
countermeasure.
Expire(seconds)
– If one client is considered as traffic flow attacker, BW1253s kicks it out and
doesn’t let it connect again during the time that
Expire
set.
Network | Link Integrity
Specify Link Integrity feature’s settings here. Enable Link Integrity, BW1253s will close wireless
connections and kick out all the wireless clients when it detects that its Ethernet network cannot be
accessed to the internet.
Figure 165 – Link Integrity settings
