BW1253s User Guide v1.0
Nov. 2013
Page 43 of 180
Interface
– show the current sub-interface.
Mode
– show the operation mode of current radio.
SSID
– a unique ID for your wireless network. It is case sensitive and must not exceed 32 characters.
The SSID is important for clients when connecting to the access point.
Need Hidden SSID
– when enabled, the SSID of this Interface is invisible in the networks list
while scanning the available networks for wireless client (SSID is not broadcasted with its
Beacons). When disabled, the AP’s SSID is visible in the available network list
[enabled/disabled]. By default the Hidden SSID is disabled
SSID status
– activated or deactivated the SSID. The default is activated SSID[check box].
Pureg
– enable/disable 11b client connection. [check box] to enable the function.
Only 11n
–only 802.11n client can connected to the SSID.
Max Station Number
– define maximum number of associated wireless client to this SSID.Leave
space means unlimited or fill in the value.[1~127 client]
Layer 2 Isolation
– Specify the layer 2 isolation policy.
Enable Intra-BSS Layer 2 Isolation
– when enabled, the clients that connect in this same BSS can’t
visit each other. By default the intra-BSS layer 2 isolation is disabled.
Intra-BSS layer2 isolation
– which enable or disable client isolation under same SSID.
Inter-BSS layer2 isolation
– which enable or disable client isolation between different
SSID.
Please go to
Wireless | Layer 2 Isolation(Inter-BSS)
menu to configure inter-BSS layer 2 Isolation. Full layer 2 isolation need to set both
intra-BSS and inter-BSS layer 2 isolation in the AP mode.
Bandwidth
– enable/disable upstream/downstream bandwidth control per SSID.
Download bandwidth
– specified the maximum downstream in Mbps controlled by the SSID.
Upload bandwidth
– specify the maximum upstream in Mbps controlled by the SSID.
Figure 53 – Multiple BSSID Setting -2
VLAN
– specify VLAN policy
Enable VLAN
– when enabled, the outgoing packets from this SSID device will be tagged with
VLAN ID and 802.1p tag.
VLAN ID
– configure VLAN ID for each Multiple SSID devices. Valid numbers are from 1 to
4094
802.1p Tag
– configure 802.1p Tag for remote APC’s or Router’s QoS uses. Eight levels
selective, Background(1), Spare(2), Best Effort(0), Excellent Effort(3), Controlled Load(4),
Interactive Video(5), Interactive Voice(6), Network Contro(7)
