BW2251 User Guide v1.0
Nov. 2013
Page 28 of 187
Figure 31 – Add a new RADIUS Server's profile
Name
– specify the new RADIUS server name which is used for selecting RADIUS server
Default
– specify this RADIUS profile as default or not. When selected, the profile will be used as
default
Authentication IP
– specify the IP address of Authentication RADIUS server [dots and digits]
Authentication Port
–specify the network port used to communicate with the Authentication RADIUS
server [1-65535]
Authentication Secret
– shared secret string that is used to make sure the integrity of data frames
used for the Authentication RADIUS server
Accounting IP
– specify the IP address of Accounting RADIUS server [dots and digits]
Accounting Port
–specify the network port used to communicate with the Accounting RADIUS server
[1-65535]
Accounting Secret
– shared secret string that is used to make sure the integrity of data frames used
for the Accounting RADIUS server
The default port value for authentication is 1812.
The default port value for accounting is 1813.
The port specified here must be the same with the one on the RADIUS server.
User Password Md5sum Secret
– if enabled, user input password will be calculated md5-sum
before pass to RADIUS server for more security [enabled/disabled]
This setting needs RADIUS server implement relevant configurations.
Save
–save the entered values
Cancel –
restore all previous values
After adding a new RADIUS server or editing an existing one, a page appears similar to the following:
