Brouwer 1570, Руководство оператора

Страница: 51 / 66

Tracking Adjustment.
The recommended method of setting the tracking is :

Position the harvester ‘ready to cut’.

With the Auto-Steer switched ‘ OFF ,’ cut a strip
of turf, for a minimum distance of 20 feet, it
must be cut straight.

Stop the harvester.
The harvester will be parallel to the cut edge, the
steering wheels ‘straight ahead’, and the Cutter
Head ‘DOWN’.

Switch the Auto-Steer ‘ ON ’, the Guide Shoe will
‘drop’.
To Set the Fine Adjust Control to ‘
Mid-Point ’:

Release the Fine Adjust Control ‘lock’ ‘ A ’.

Press on the End Button ’ B ’, and slide the
Control Knob Rod ‘ in or out’ , to find its mid-
point of travel.

Re-tighten the Control ‘lock’ ‘ A ’.

Position the Guide Shoe against the ‘cut edge’
of turf.

Fit a 1¼ in Wrench ‘ C ’, on the Top Lever Arm.

Use the wrench on the Lever Arm to rotate the
Cam

until the ¼ inch hole in the Cam aligns with the
hole in the Support Plate.

Insert a ¼ in. Bolt ‘ D ’, in the holes to lock the
Cam in place.
The Sensor Valve will now be in the ‘ NEUTRAL ’
position.
To prevent
any movement of the Top Lever Arm and
Spring Column Shaft, use the wrench to hold the Top
Lever Arm firmly, against spring pressure and :

Loosen the Shoe Arm Clamp Bolt ’ E ’, and move
the Guide Shoe against the ‘cut edge’ of the turf.

Tighten the Shoe Arm Clamp Bolt.

IMPORTANT
Before operating the Auto-Steer the ¼ in. bolt must be
removed from the Cam. Failure to do so will result in
damage to the Auto-Steer mechanism.
OPERATION
4-14