Brouwer 1570, Руководство оператора

Страница: 12 / 66

SAFETY
CAUTION
NEVER try to get on or off a moving harvester.
Before leaving operator position, place in PARK,
lower implements to the ground, stop the engine and
remove the key.
Do not change the engine governor setting or over
speed the engine.
Inspect the area where the equipment is to be used
and remove all objects which might or damage the
machine.
Only operate with good light, keeping away from
holes and hidden hazards.
Starting
Start only according to instructions in this manual or
on the machine.
DO NOT use starting fluid.
WARNING
Avoid possible injury or death from runaway
machine.
DO NOT start engine by shorting across starter
terminals. Machine will start in gear if normal
circuitry is bypassed.
NEVER start engine while standing on the ground.
Start engine only from operators seat, with
transmission in neutral or in park.
Before attempting to start the engine, make sure the
transmission is in park.
2-03
Interrupting operation
Reduce throttle to slow, and allow engine to operate
at no load for several minutes before shitting down
engine.
To park harvester safely, stop on level ground, move
machine controls to the “OFF” position, lower
equipment to the ground, put gear shift lever in
PARK, SET brakes, STOP the engine and remove
key.
Before leaving the operator’s seat, wait for engine
and attachment parts to stop moving.
Stop engine, move machine controls to the “OFF”
position and remove the key, before checking,
cleaning or working on the machine. If the machine
begins to vibrate abnormally, inspect and make
repairs as needed before restarting, except for
repairs or adjustments as specifically noted, where
the engine must be running. Keep clear of moving
parts in these circumstances.
Highway Operation
Prevent collisions between other road users, slow
moving tractors with attachments or towed
equipment and self-propelled machines on public
roads. Frequently check for traffic from the rear,
especially turns and use turn signal lights.
Slow down and use caution when making turns and
crossing roads and railroad tracks.
Use headlights, flashing warning lights and turn
signals day and night. Follow local regulations for
equipment lighting and marking. Keep lighting and
marking visible, clean and in good working order.
Replace or repair lighting and marking that has been
damaged or lost.
Couple brake pedals together for road travel.