Sending a fax
25
4
e
Press
Mono Start
or
Colour Start
.
Faxing from the ADF
4
The machine starts scanning the
document to be sent.
Faxing from the scanner glass
4
If you pressed
Mono Start
, the
machine starts scanning the first
page. Go to step
.
If you pressed
Colour Start
, the
LCD asks if you want to send a
colour fax. Press
1
to choose
Colour fax
to confirm. The
machine starts scanning and
sending the document.
f
When the LCD asks you
Next Page?
,
do one of the following:
To send a single page, press
2
to
choose
No(Send)
(or press
Mono Start
again).
The machine starts sending the
document.
To send more than one page, press
1
to choose
Yes
and go to step
g
Place the next page on the scanner
glass.
Press
OK
.
The machine starts scanning the page.
(Repeat steps
for each
additional page.)
h
After all the pages have been scanned,
press
2
or
Mono Start
to start sending.
Stop faxing
4
To stop faxing, press
Stop/Exit
.
Setting scanner glass size for
faxing
4
When documents are Letter size, you need to
set the Scan Size to Letter. If you do not, the
side portion of the faxes will be missing.
a
Load your document.
b
Press (
FAX
).
c
Press
a
or
b
to choose
Advanced Settings
.
Press
OK
.
d
Press
a
or
b
to choose
Glass ScanSize
.
Press
OK
.
e
Press
a
or
b
to choose
A4
or
Letter
.
Press
OK
, and then press
Clear
.
f
Enter the fax number.
g
Press
Mono Start
or
Colour Start
.
NOTE
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User’s Guide:
Setting
your changes as a new default
.)
• This setting is only available for sending
documents from the scanner glass.
Colour fax transmission
4
Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the
machine’s memory. When you send a colour
fax, the machine will send it in real time (even
if
Real Time TX
is set to
Off
).