COPYRIGHTS © 2004
QWIK-Fix
-
Publications
™
At no time does QWIK-Fix-Publications or its licensees permit the copying in any format written or electronic of any of the data provided in any of their
publications
QWIK-Fix
-
Publications
™
2:1
Brother TZ1 B651
IMPORTANT !!!
SWITCH THE MACHINE OFF BEFORE PROCEEDING WITH THE ADJUSTMENTS
Check Spring Adjustment
With the machine threaded and fabric under the presser foot turn the hand wheel towards you to
produce 3 or 4 stitches. STOP
Now continue to turn the hand wheel towards you until the thread take up lever
Fig 1
is at its highest
point. STOP
The thread should have pulled the check spring down from its stop or rest point.
Continue turning the hand wheel slowly towards you until the eye of the needle has just entered the
fabric. STOP
The check spring should now be resting with no more tension on it.©
If it rests too early (before the eye has entered the fabric) slacken the tension unit screw
Fig 2
and turn
the tension unit to the left about 1/8
th
of a turn and lock the screw back up.
If it rests too late (after the eye has entered the fabric) slacken the tension unit screw
Fig 2
and turn the tension unit to the right about 1/8
th
of a turn and lock the screw back up.
Continue to check and adjust as required.
Fig 1
Fig 2
FIG 3
Check spring
Thread Take Up Lever
Thread Take Up Lever
Screw position is to the right of the tension unit in the
head casting.
Decrease check
Tension Unit
Check Spring adjuster
Increase check