Brother S-7780A Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 84

background image

S-7780A

7. TROUBLESHOOTING

71

Switch-related errors

Code Cause

Remedy

E050

Machine head is detected as being tilted back when
start sewing.

・

Turn off the power, and then return the machine

head to its original position.

・

Turn off the power and check the connection of
connector P2.

E051

Machine head is detected as being tilted back
during sewing.

Turn off the power and check the connection of
connector P2.

E055

Machine head is detected as being tilted back when
power was turned on.

・

Turn off the power, and then return the machine

head to its original position.

・

Turn off the power and check the connection of
connector P2.

E065

A disabled key was being pressed when the power
was turned on.

Turn the power off and then back on again.
* Do not press a disabled key while turning on the

power.

E066

The hand switch was being pressed when the
power was turned on.

Turn the power off and then back on again.
* Do not press the hand switch when turning on the

power.

E090

Connection of treadle was not detected when
power was turned on.

Turn off the power and check the connection of
connector P7.

E095

Treadle or standing operation pedal was being
pressed when power was turned on.

Return treadle unit or standing up operation pedal to
original portion.
* Do not press the treadle or the standing operation

pedal when turning on the power.

Sewing machine motor-related errors

Code

Cause

Remedy

E111

The needle up stop position exceeded the specified
value when the sewing machine motor stopped.

Turn off the power and check if the sewing machine
motor or thread trimming mechanism is stiff or not.

E112

The needle up or needle down stop position did not
reach the specified value when the sewing machine
motor stopped.

Turn off the power and check if the sewing machine
motor or thread trimming mechanism is stiff or not.

E113

The needle down stop position exceeded the
specified value when the sewing machine motor
stopped.

Turn off the power and check if the sewing machine
motor or thread trimming mechanism is stiff or not.

E130

Sewing machine motor did not operate at sewing
start or during sewing.

・

Turn off the power and check if the sewing machine

motor is stiff or not.

・

Turn off the power and check the connections of the

sewing machine motor connector and connector
P4.

E131

Sewing machine motor encoder connection was not
detected when power was turned on.

Turn off the power and check the connection of
connector P4.

E132

Abnormal sewing speed of sewing machine motor
was detected during sewing.

Turn off the power and check the connection of
connector P4.

E133

Abnormal signal of sewing machine motor encoder
was detected during sewing.

Turn off the power and check the connection of
connector P4.

E140

Sewing machine motor ran in opposite direction to
the direction specified during sewing.

Turn off the power and check the connection of
connector P4.

E150

Abnormal overheating detected in sewing machine
motor.

Turn off the power and check the sewing conditions.

E151

Motor overheating sensor connection was not
detected.

Turn off the power and check the connection of
connector P4.

E161

Sewing machine motor overload was detected
during sewing.

Turn off the power and check the sewing conditions.

E190

Sewing machine motor was running continuously
for too long during sewing.

Turn the power off and then back on again.

E191

Thread trimming solenoid operation was not
completed within the specified period.

Turn off power and check if the thread trimming
mechanism is stiff.

«
...
78
79
80
81
82
...
»

Содержание S-7780A





















































































Отзывы:

Нет отзывов

Похожие инструкции для S-7780A

Бренд: KANSAI SPECIAL Страницы: 21

Бренд: Panasonic Страницы: 8

Бренд: UNIS Страницы: 19

Бренд: Cricut Страницы: 4

Бренд: A&A Global Industries Страницы: 16

Бренд: Gamma Страницы: 32

Bourg Binder 3001

Бренд: C.P.Bourg Страницы: 51

Бренд: Pfaff Страницы: 150

Бренд: Singer Страницы: 33

Windsor Chariot 3 iExtract 26 Duo

Бренд: Kärcher Страницы: 151

Бренд: JUKI Страницы: 115

Бренд: LG Страницы: 40

Бренд: LG Страницы: 340

Бренд: LG Страницы: 92

Бренд: LG Страницы: 48

FH4U2TDH(P)(0-9)N Series

Бренд: LG Страницы: 45

Бренд: JUKI Страницы: 187

IMAGECHECKER PV230

Бренд: Panasonic Страницы: 114

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды