Brother RH-9820, Инструкция по эксплуатации

Страница: 16 / 134

3. INSTALLATION
RH-9820
7
3-2. Installing the control box
CAUTION
Before installing the control box, take steps to make sure that the control box does not fall down.
If this is not done, injury to feet or damage to the control box may result.
Before installing the control box (1),
check that the model plate (2) on the
control box (1) is “RX9820” to indicate
that it is an RX-control box for RH-9820
sewing machines.
(1) Control box
(3) Bolts [4 pcs.]
(4) Plain washers [4 pcs.]
(5) Nuts [8 pcs.]
NOTE:
Check that the control box (1) is at
least 10 mm away from the leg. If
the control box (1) and the leg are
too close together, it may result in
incorrect sewing machine
operation.
10mm or more
Leg
(6) Power switch
(7) Screws [2 pcs.]
(8) Staples [5 pcs.]
* Use the remaining two staples to
secure the power cord (9) in a
position that matches the position
of the wall outlet.
NOTE:
Take care when tapping in the
staples (8) to make sure that they
do not pierce the power cord (9).
0341B
Operator
Operator
0404B
0340B