Brother PT-P910BT, Руководство пользователя

Страница: 76 / 88

Home > Troubleshooting > Error and Maintenance LED Indications
Error and Maintenance LED Indications
The LED indicators light and flash to indicate the Label Printer's status.
Power LED Lit/Flashing Condition Solution
Orange Flashing
(Once per second) Head cooling The main unit of the Label Printer detects the
temperature of the head and resumes
printing.
Do not replace the tape or turn the
power ON or OFF while the head is
cooling.
Lit for three seconds,
then off for one
second In an idle state
(Bluetooth mode is
off) Bluetooth settings can be changed using the
following method.
1. Press and hold for about nine seconds
until the Power LED flashes in green, and
then release
while the Power LED
flashes in green.
2. Press twice quickly. Bluetooth
connection switches on and off, and then
the Label Printer turns off.
3. Press to turn the Label Printer on.
* If the Power LED is green, Bluetooth is
ON, and if it is orange, Bluetooth is OFF.
Red Lit Recovery mode Transfer the program again.
If the problem continues, contact Brother
customer service or your local Brother dealer.
Flashing
(Once per second) Battery not installed.
Gently press .
Insert or replace the battery.
• No Tape Cassette
installed.
• Incorrect Tape
Cassette installed.
• Incompatible Tape
Cassette installed.
Gently press .
• Insert the correct Tape Cassette.
• Close the Cassette Cover.
Transmission error
Gently press .
• When using a mobile device, establish a
Bluetooth connection.
• When using a computer:
-
Reconnect the USB cable.
- Change the USB port.
- Establish a Bluetooth connection.
Flashing twice per
second, then off for
one second • Battery error
• Insufficient charge
• Power supply high
voltage error
• Restart the Label Printer.
• Charge the battery.
• If the problem is still not resolved, replace
the battery.
Cutter error Restart the Label Printer.
Flashing Rapidly System error If the problem continues, contact Brother
customer service or your local Brother dealer.
73