Brother PT-E300 Скачать руководство пользователя

Страница: 14 / 61

INTRODUCTION

General Precautions

Rechargeable Li-ion battery

• At the time of purchase, the rechargeable Li-ion battery is slightly charged so that the

operation of the labelling system can be verified; however, the rechargeable Li-ion battery

should be fully charged with the AC adapter before the labelling system is used.

• If the labelling system will not be used for a long period of time, remove the rechargeable

Li-ion battery from the labelling system, and then store it in a location where it is not

exposed to static electricity, high humidity, or high temperatures (temperatures between

C/59

F and 25

C/77

F and 40% to 60% humidity are recommended). In order to

maintain the efficiency and life of the Li-ion rechargeable battery, charge it at least every

six months.

• If you notice anything unusual about the rechargeable Li-ion battery the first time it is used,

for example overheating or rust, DO NOT continue to use the battery. Contact Brother

customer service.

Labelling System

• DO NOT install the P-touch labelling system near any device that will cause

electromagnetic interference. The P-touch labelling system may malfunction if left near a

television or radio etc.

• DO NOT use the P-touch labelling system in any way or for any purpose not described in

this guide. Doing so may result in injury or damage to the labelling system.

• DO NOT put any foreign objects into the tape exit slot, AC adapter connector, or any other

part of the labelling system.

• DO NOT touch the print head (see page 6) with your fingers. Use the optional print head

cleaning cassette (TZe-CL4), the self-cleaning function of the labelling system, or a soft

wipe (e.g.a cotton swab) when cleaning the print head (see “Cleaning the Unit” on

page 46).

• DO NOT clean any part of the labelling system with alcohol or other organic solvents. Only

use a soft, dry cloth.

• DO NOT place the P-touch labelling system in direct sunlight, near heaters or other hot

appliances, or in any location exposed to extremely high or low temperatures, high

humidity, or dust. The standard operating temperature range of the P-touch labelling

system is 10

C to 35

C (50

F to 95

F).

• DO NOT leave any rubber or vinyl, or products made of rubber or vinyl, on the labelling

system for an extended period of time, otherwise the labelling system may become

stained.

• Depending on the environmental conditions and the applied settings, some characters or

symbols may be difficult to read.

• Use only Brother TZe tapes with the P-touch labelling system. Do not use tapes that do not

have the

mark.

• DO NOT pull or apply pressure to the tape in the cassette to avoid damaging the P-touch

labelling system.

• DO NOT try to print labels using an empty tape cassette or without a tape cassette in the

P-touch labelling system. Doing so will damage the print head.

• DO NOT attempt to cut the tape while printing or feeding since this will damage the tape.
• Depending on the location, material, and environmental conditions, the label may unpeel

or become irremovable, and the color of the label may change or be transferred to other

objects.

General Precautions

Содержание PT-E300






























































Результаты поиска

Содержание PT-E300

Отзывы:

Похожие инструкции для PT-E300

Бренды по названию

Популярные бренды

Brother PT-E300, Руководство пользователя

Результаты поиска

Содержание PT-E300

Отзывы:

Похожие инструкции для PT-E300

Бренды по названию

Популярные бренды