Brother PT-E300 Скачать руководство пользователя

Страница: 33 / 61

EDIT

ING A LA

BEL

Creating a Bar Code Label

Setting Bar Code Parameters and Entering Bar Code Data

Press the

Bar Code

key.

The Bar Code Setup screen is displayed.

Select an attribute using the or key, and then set a value for that attribute using

the or key.

- Protocol:

CODE39

, CODE128, EAN-8, EAN-13, GS1-128 (UCC/EAN-128), UPC-A,

UPC-E, I-2/5 (ITF), CODABAR

- Width:

Small

, Large

- Under #:

, Off

- Check Digit:

Off

Check digit only available for Code39, I-2/5 and Codabar protocols.

Press the

Enter

key to apply the settings.

Type in the bar code data.

Special characters can be entered in the bar code when using

the CODE39, CODE128, CODABAR or GS1-128 protocols.

When not using special characters, go to step 7.

Press the

Symbol

key.

A list of characters available for the current protocol is displayed.

Select a character using the

or key, then press the

Enter

key to insert the character in the bar code data.

Press the

Enter

key to insert the bar code in the label.

The bar code is displayed on the text entry screen.

Editing and Deleting a Bar Code

• To edit bar code parameters and bar code data, position the cursor beneath the bar code

mark on the data entry screen and then open the Bar Code Setup screen. Refer to “Setting

Bar Code Parameters and Entering Bar Code Data” on page 30.

• To delete a bar code from a label, position the cursor to the right of the bar code mark on

the data entry screen and press the

Backspace

key.

Up to five bar codes can be entered on a label.

Characters may not appear below the bar code even when "On" is selected for "Under #", depending

on the tape width being used, the number of lines entered, or the current character style settings.

New settings are NOT applied if you do not press the

Enter

key.

To print labels refer to “LABEL PRINTING” on page 41.

• Press the

Escape

key to return to the previous step.

• Press the

Space

key to set the selected attribute to the default value.

• Refer to the Bar Code Settings table for a list of all available settings.

Содержание PT-E300






























































Результаты поиска

Содержание PT-E300

Отзывы:

Похожие инструкции для PT-E300

Бренды по названию

Популярные бренды

Brother PT-E300, Руководство пользователя

Результаты поиска

Содержание PT-E300

Отзывы:

Похожие инструкции для PT-E300

Бренды по названию

Популярные бренды