Changing the Printer Settings
69
3
Advanced Tab
3
1 Roll Printer Case Setting
Specifies the setting for using the optional roll printer case. If [
On
] is selected, you can adjust the feed
value or amount of paper retraction for the roll printer case.
Available settings: [
On
], [
On (Without Anti Curl)
], [
On (Short Feed)
], [
Off
]
2 Print Length Scaling
Specifies the reduction or enlargement ratio for printing.
Available settings: 95% - 105% (in increments of 0.5%)
3 Form Feed Mode
Specifies how the printer responds to form feed commands received from any source.
Available settings: [
No Feed
], [
Fixed Page
], [
End of Page
], [
End of Page Retract
]
For more information on the options, see
Settings That Can Be Changed Using the Windows
4 Paper Grip Time
Specifies the delay before the printer grabs the paper.
Available settings: [
0.5 seconds
], [
0.8 seconds
], [
1.2 seconds
]
5 Pre-Feed
If [
Enable
] is selected, the printer ejects a short length of paper when the printer turns on. When using
perforated roll paper or roll paper that is pre-printed, we recommend setting this parameter to [
Disable
].
Available settings: [
Enable
], [
Disable
]
6 Paper Sensor Threshold
Specifies the threshold of the paper detection sensor.
Available settings: 0-255
7 Print Data after Printing
Allows to erase print data after it is printed.
Available settings: [
Erase All Print Data
], [
Keep Print Data
]
1
2
3
4
5
6
7
8
9
10
11
Содержание PJ-722
Страница 11: ...Setting Up the Printer 3 1 LED Indicators 1 PJ 722 PJ 723 PJ 762 PJ 763 PJ 763MFi PJ 773 ...
Страница 165: ......
