Brother PJ-722, Онлайн руководство пользователя

Страница: 41 / 165

Using the Printer
33
2
4 Form Feed Mode
Specifies how the printer responds to form feed commands received from any source.
Available settings: [
No Feed ], [ Fixed Page ], [ End of Page ], [ End of Page Retract ]
 No Feed - Paper is not fed at the end of a job. Because additional paper is not ejected at the end of the
document, use this setting when printing on non-perforated roll paper. Make sure to set [ Paper Type ]
to [ Roll ].
 Fixed Page - Paper is fed at the end of a job to suit the vertical length of the selected page size (for
example: letter, legal, A4, or user-defined size). Select this setting when using cut sheet paper. Make
sure to set [
Paper Type ] to [ Cut Sheet ] or [ Roll ].

End of Page - Paper is fed until the paper sensor detects a pre-printed end-of-page mark on the paper
or the end of the sheet, or until 14" (355.6 mm) of paper has been fed. Use this setting when [ Paper
Type ] is set to [ Cut Sheet ] or [ Perforated Roll ].
 End of Page Retract - Paper is fed until the paper sensor detects a pre-printed end-of-page mark on
the paper. Then, the paper is fed back to the starting position before the next page is printed. Use this
setting when [
Paper Type ] is set to [ Perforated Roll ].
5 Feed Margin
Specifies the feed margin for the last page of the print job. Use this option when [ Form Feed Mode ] is set
to [ No Feed ].
Available settings: 0" - 2" (0 mm - 51 mm)
6 Feed Position
Specifies the paper feed position for printing on custom paper.
Available settings: [
Center ], [ Left Alignment ]
7 Multiple Page
Prints more than one page on a single sheet of paper.
Available settings: [
Normal ], [ 2 in 1 ], [ 4 in 1 ], [ 9 in 1 ]
8 Page Order
Specifies the page order when a setting other than [ Normal ] is specified for [ Multiple Page ].
9 Border Line
Specifies the border line between pages when a setting other than [ Normal ] is specified for [ Multiple
Page ].
Available settings: [ Solid ], [ Dashed ], [ None ]