- 28 -
1.
POSITION OF TOUCH PANEL
(BE SURE TO ADJUST THE TOUCH PANEL AFTER RECONNECTING THE
TOUCH PANEL CONNECT.)
STANDARD
The deviation between the liquid crystal display and touch panel should be within 1 mm when the touch panel is
pressed.
ADJUSTMENT
1.
While pressing the start/stop, reverse stitch and needle positions buttons, turn on the power to display the
screen for the touch panel adjustment mode.
2.
While pressing the start/stop button, touch the touch panel at the positions marked by crosses (+) in order
from 1 to 5.
(When touching the touch panel, use an object with a rounded tip such as a pencil or matchstick. Never use
a hard or sharp-pointed object.)
If the buzzer sounds once when cross number 5 is touched, the adjustment has been made correctly.
If the buzzer sounds four when cross number 5 is touched, an error has occurred. In this case, touch the
crosses on the touch panel again in order from 1 to 5.
Never press the thread cutter button during this time. (Doing so may cause a malfunction.)
3.
Turn the power off, then on again and check that the screen display and the touch panel positions are
aligned.
Adjustment Points
If the buzzer sounds more than twice while making adjustment (2), perform the procedure again from the
beginning since the position has not been correctly set.
Touch panel adjustment item
Содержание PE-300S
