Brother P-touch 1950, Руководство пользователя

Страница: 41 / 130

37
To turn the Length function on or off:
1 While holding down
c
, press
T
once, and keep
c
held down to display the
current length of the label (the text and both margins). Then the display will show the cur-
rent label length setting ( ON or OFF ).
2 While still holding down
c
, continue pressing
T
until the desired label length set-
ting is displayed.
☞
The Length indicator comes on when ON is selected.
3 Release
c
. If ON was selected, the current label length setting is displayed.
4 Press
h
or
e
to select the desired length or use the number keys to enter a length.
☞
To change the units (inches or centimeters) used to display the label length, press
M
until the desired units are displayed.
To change the length in 1” (1.0-cm) steps, hold down either
h
or
e
, and then
release the key when the desired setting is displayed.
5 Press
r
.
EXAMPLE
To select a label length of 5”:
1
While holding down
c
, press
T
once, and keep
c
held down.
2
While still holding down
c
, continue press-
ing
T
until ON is displayed.
3
Release
c
.
5 . 3 i n c h
L E N G T H
O F F
L E N G T H
O N
L E N G T H
4 . 0 i n c h
L E N G T H