Brother NS2850D Скачать руководство пользователя страница 91

Страница: 91 / 124

Embroidering

BRO

ER
Y

Cut the excess thread jumps within the color.

■

Changing the thread color display

You can display the name of the thread colors or
embroidery thread number.

Touch

and use

to display the following

settings screen.

Use

of the

menu to select [Name of

Color] or [#123] (thread number).

• When [Name of Color] is selected, the name of the

thread colors is displayed.

• When [#123] is selected, the embroidery thread

number is displayed.

Use

of the

menu to select the thread

brand.

Touch .

■

If the thread breaks or the bobbin runs out of
thread during embroidering

Press the “Start/Stop” button to stop the machine.

Touch

and thread the upper thread or install the

bobbin thread again.

• If the bobbin thread is almost empty, press

(Thread cutter button) to cut the upper and bobbin
threads, remove the embroidery frame, and then
replace the bobbin with one wound with thread.

Touch .

Touch

, or

to move the needle back the

correct number of stitches before the area where the
thread broke, and then touch

• Touch

to restart from the beginning.

Lower the presser foot and press the “Start/Stop”
button to continue embroidering.

■

Resuming embroidery after turning off the
power

The current color and stitch number are saved when
embroidery is stopped. The next time the machine is
turned on, you have the option to continue or delete the
pattern.

Memo

• Colors on the screen may vary slightly from actual

spool colors.

• The default thread brand is set to [Original].

Imported embroidery data is displayed with the
thread brand specified in the embroidery editing
software.

Memo

• The thread brand setting will be applied with the

next pattern that is loaded.

Memo

• If you cannot move back to the area where the

thread broke, touch

to select the color and

move to the beginning position of that color, then
use

to move ahead to slightly

before where the thread broke.

Содержание NS2850D





























































































































Результаты поиска

Содержание NS2850D

Отзывы:

Похожие инструкции для NS2850D

Бренды по названию

Популярные бренды

Brother NS2850D, Руководство по эксплуатации

Результаты поиска

Содержание NS2850D

Отзывы:

Похожие инструкции для NS2850D

Бренды по названию

Популярные бренды