6-31
Disassembly of the ASF
(8) Pull the lock arm outwards and remove the registration sensor actuator and its spring.
(9) Remove the ASF switch from the latch on the right end of the ASF, then disconnect its harness
from the sensor PCB and take it out of the harness guide.
(10) Unlatch the sensor PCB.
(11) Warp either of the "x" locks on the ASF cover outwards and remove the shield cover.
(12) Remove the pawled bushing from the left end of the ASF core shaft by pulling its pawls
outwards. Pull the pawl of the ASF roller ASSY outwards (in the direction of arrow
) and
pull the ASF core shaft out to the right (
). The ASF roller ASSY will come off.
(13) Remove two screws "d" from the paper tray base and pull it up and to the rear.
(14) Warp the center of the lower chute and disengage the locking tabs on both ends of the lower
chute from the ASF frame.
(15) Remove four screws "e" from the center base flap ASSY. Lightly push the ASSY up from the
bottom and release the two hooks on the rear end of the ASSY.
Shield cover
"d"
"d"
Urethane section
"e"
Pawled bushing
ASF cover
Hooking the ASF
roller spring
(Viewed from the rear)
ASF roller ASSY
ASF roller spring
Lower chute
Latch
Lock
arm
Actuator spring
Sensor PCB
Registration
sensor actuator
ASF switch harness
Gear 50
ASF core shaft
"x"
"x"
Pawl
ASF roller ASSY
Center base flap ASSY
Paper tray base
Latch
"d" and "e": Taptite, bind B M2.6x8
Содержание MFC-4820C
