Brother MFC-4820C, Руководство по обслуживанию

Страница: 244 / 268

App. 4-32
WSW31
(Function setting 9)
Selector
No.
Function Setting and Specifications
1 Not used.
2
Default reduction rate for
failure of automatic reduction
during recording
0: 100% 1: 70%
3 Not used.
4 Ink empty sensor 0: Yes 1: No
5
Minimum ON and OFF
duration of ringer signals
effective in distinctive ringing
0: 130 ms 1: 50 ms
6
|
8
Not used.
NOTE: Selector 5 is applicable only to the U.S.A. versions.
Selector 2: Default reduction rate for failure of automatic reduction during recording
This selector sets the default reduction rate to be applied if the automatic reduction function fails
to record one-page data sent from the calling station in a single page of the current recording
paper.
If it is set to "0," the equipment records one-page data at full size (100%) without reduction; if it is
set to "1," the equipment records it at 70% size.
Selector 5 Minimum ON and OFF duration of ringer signals effective in distinctive ringing
The ringer pattern consists of short and long rings, e.g., short-short-long rings. This selector sets
the minimum ON and OFF duration of ringer signals that are required for the equipment to
interpret ringer signals as being ON or OFF. This is to prevent components of a ringer pattern from
being misinterpreted due to chattering in distinctive ringing.
The equipment monitors ringer signals at 10-ms intervals. If the signal is ON, the equipment
1; if it is OFF, it counts -1. If the counter increments up to +5 or +13 when this selector is
set to "1" (50 ms) or "0" (130 ms), respectively, the equipment interprets the current signal as
being ON.
If the counter returns to zero, the equipment interprets the signal as being OFF.
If the Distinctive Ring is set to OFF, this selector is not effective.