Brother MFC-4820C, Руководство по обслуживанию

Страница: 230 / 268

App. 4-18
WSW15
(REDIAL facility setting)
Selector
No.
Function Setting and Specifications
1
2
Redial interval
No. 1 2
0 0 : 5 minutes
0 1 : 1 minute
1 0 : 2 minutes
1 1 : 3 minutes
3
|
6
No. of redialings
No. 3 4 5 6
0 0 0 0 : 16 times
0 0 0 1 : 1 times
0 0 1 0 : 2 times
0 0 1 1 : 3 times
| |
1 1 1 1 : 15 times
7
Redialing for no response sent
from the called terminal
0: Redialing 1: No redialing
8 CRP option 0: Disable 1: Enable
Selectors 1 through 6: Redial interval and No. of redialings
The equipment redials by the number of times set by selectors 3 through 6 at intervals set by
selectors 1 and 2.
Selector 7: Redialing for no response sent from the called terminal
This selector determines whether or not the equipment redials if no G3 command response comes
from the called station after dialing within the time length set by selectors 7 and 8 of WSW09.
Selector 8: CRP option
If a command error occurs in the equipment (calling station), the equipment usually waits for three
seconds and then makes a retry three times. This CRP option is a request command that can be sent
from the called station for requesting the calling station to retry the failed command immediately.