Brother MFC 1870MC, Руководство по обслуживанию, Страница: 159 / 217

VI –
10
Code 1 Code 2 Causes
(9) Signal isolation
90 01 Unable to detect video signals and commands within 6
seconds after CFR is transmitted.
90 02 Received PPS containing invalid page count or block
count.
Code 1 Code 2 Causes
(10) Video signal reception
A0 03 Error correction sequence not terminated even at the final
transmission speed for fallback.
A0 11 Receive buffer empty. (5-second time-out)
A0 12 Receive buffer full during operation except receiving into
memory.
A0 13 Decoding error continued on 500 lines.
A0 14 Decoding error continued for 10 seconds.
A0 15 Time-out: Five seconds or more for one-line transmission.
A0 16 RTC not found and carrier OFF signal detected for 6
seconds.
A0 17 RTC found and command detected for 60 seconds.
A8 01 RTN, PIN, or ERR received at the calling terminal. *
A9 01 RTN, PIN, or ERR received at the called terminal. *
AA 18 Receive buffer full during receiving into memory.
* Available in Germany and Austria only.
(11) General communications-related
Code 1 Code 2 Causes
B0 01 Polarity inversion detected.
B0 02 Unable to receive the next-page data.
B0 03 Unable to receive polling even during turn-around trans-
mission due to call reservation.
B0 04 PC interface error.