2. Printing Methods
18
e
Put paper in the MP tray. Make sure that the paper stays under the maximum paper mark (
b
) on both
sides of the tray.
Note
• Envelope joints that are sealed by the manufacturer should be secure.
• The side to be printed on must be face up.
• All sides of the envelope should be properly folded without wrinkles or creases.
f
While pressing the paper-guide release lever, slide the paper guide to fit the paper size.
g
Send the print data to the printer.
Note
• Remove each sheet or envelope at once after printing. Stacking the sheets or envelopes may cause the
paper to jam or curl.
• If envelopes get smudged during printing set the
Media Type
to
Thick Paper
or
Thicker Paper
to
increase the fixing temperature. To adjust the print density setting, see
Printing on thick paper, labels and
• If the envelopes is creased after they are printed, see
