Brother HL-2460N, Руководство пользователя

Страница: 52 / 245

1-32
✒ ✒ ✒ ✒
Note
•
When printing, the inside tray automatically rises to feed paper into the
printer.
•
If envelopes get smudged during printing, set the print density to a
higher value in the QUALITY mode with the control panel setting for
darker printouts.
To adjust the print density setting, see Chapter 3.
•
Envelope joints that are sealed by the manufacturer should be secure.
•
All sides should be properly folded without any wrinkles or creases.
Most envelopes will perform acceptably on your printer. However, some
envelopes will have feed and print quality problems because of their
construction. A suitable envelope should have edges with straight, well
creased folds and should not have more than two thicknesses of paper
along the leading edge. The envelope should lie flat and not have baggy or
flimsy construction. Purchase quality envelopes only from a supplier who
understands that the envelopes will be used in a laser printer. All envelopes
should be tested prior to use to ensure desirable print results.
✒ ✒ ✒ ✒
Note
The manufacturer neither warrants nor recommends the use of a particular
envelope because envelope properties are subject to change by the
envelope manufacturer. The entire responsibility for the quality and
performance of envelopes lies with the customer.