manualshive.com logo in svg

Brother HL-1240, Руководство по обслуживанию

Поделиться
Скачать
Brother HL-1240 Скачать руководство пользователя страница 73

CHAPTER 4  DISASSEMBLY AND RE-ASSEMBLY

4-11

  3.5

Top Cover

(1)  Remove the two M3x10 Taptite screws securing the top cover.

(2)  Release the hooks on either side of the top cover from the bosses on the main cover by

pulling the top cover forwards.

Fig. 4-16

(3)  Open the rear cover, then release the hooks (A) at the right and left hand sides of the top

cover while pushing them towards the side of the printer from the rear.

(4)  Lift up the top cover and release the hooks (B) at the right and left hand sides of the top

cover to remove the top cover.

Fig. 4-17

Taptite, cup M3x10

Taptite, cup M3x10

Top cover

Step (2)

Top cover

(hook (B))

(hook (B))

(hook (A))

Rear cover

Step (3)

Rear cover

(boss)

Содержание HL-1240














































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды