manualshive.com logo in svg

Brother HL-1240, Руководство по обслуживанию

Поделиться
Скачать
Brother HL-1240 Скачать руководство пользователя страница 217

Shipment of the Printer

If for any reason you must ship your Printer, carefully package the Printer to avoid any
damage during transit. It is recommended that you save and use the original packaging. The
Printer should also be adequately insured with the carrier.

!

Caution

When shipping the Printer, the DRUM UNIT assembly including the TONER
CARTRIDGE must be removed from the Printer and placed in the plastic bag.
Failure to remove the unit and place it in the plastic bag during shipping
will cause severe damage to the Printer and will VOID THE
WARRANTY.

1 Remove the drum unit assembly.

 

2 Place it in the plastic bag and seal

the bag completely.

3 Remove the AC cord from the

printer.  Re-pack the printer.

Содержание HL-1240














































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды