HE-8000
4. INSTALLATION
19
4) Installation underneath the work table
* Standard BROTHER work tables are provided
with installation holes for use in installing the
transformer.
1. Remove the screws (1), and then remove the
handle (2).
2. Use the bolts (4), flat washers (5), spring washers
(6) and nuts (7) to install the transformer as
shown in the illustration, while leaving a gap of 2
mm between the work table and the cushion
collars (3).
Use the bolts (4), flat washers (5), spring washers
(6), nuts (7) and cushion brackets (3) which are
included.
<Connecting the cords>
1. Loosen the screws (1), and then remove the
transformer cover (2).
2. Connect the control box connector (3) to the
transformer connector (4).
3. Secure the connected cords with the cord holder
(5) and the screw (6), and place them inside the
transformer cover (2). Install the transformer
cover (2) with the screws (1).
4. Secure the cords to the work table using staples.
(3)
(2)
(4)
(1)
(6)
(5)
(5)
(6)
(1)
2079Q
2080Q
Work table hole
positions
(6)
(4)
(3)
(5)
(7)
(3)
(5)
(6)
(7)
2 mm
2076Q
2077Q
2078Q
2075Q
(2)
(1)
