Brother DCP-19010CN, Руководство пользователя

Страница: 65 / 136

Troubleshooting and routine maintenance
57
C
Init Unable XX
The machine has a mechanical
problem. Do one of the following:
„ Disconnect the machine from the power
for several minutes, then reconnect it.
„ If the problem continues, call your
Brother dealer.
Jam Inside
The paper is jammed inside the
machine. (See Paper jams on page 61.)
Jam Rear
The paper is jammed in the back
of the machine. (See Paper jams on page 61.)
Jam Tray
The paper is jammed in the paper
tray of the machine. (See Paper jams on page 61.)
No Belt Unit
The belt unit is not installed
correctly. Re-install the belt unit. (See Replacing the
belt unit on page 89.)
No Paper
The machine is out of paper or
paper is not correctly loaded in
the paper tray. Do one of the following:
„ Refill the paper in the paper tray and
press
Mono Start or Colour Start or put
the paper in the manual feed slot.
„ Remove the paper and load it again.
Then press
Mono Start or Colour Start .
„ If the problem is not solved, the paper
pick-up roller may be stained. Clean the
paper pickup roller. (See
Cleaning the
paper pick-up rollers on page 75.)
No Toner
The toner cartridge or the drum
unit and toner cartridge assembly
is not installed correctly. Re-install the toner cartridge or the drum unit
that is indicated on the LCD.
No Waste Toner
The waste toner box is not
installed correctly. Re-install the waste toner box. (See
Replacing the waste toner box on page 93.)
Out of Memory
The machine’s memory is full. Copy operation in progress
Do one of the following:
„ Press Mono Start or Colour Start to
copy the scanned pages.
„ Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
„ Clear the data from the memory. (See
Out of memory message on page 32.)
Print operation in process
Reduce print resolution. (See Advanced tab
in the Software User’s Guide on the
CD-ROM.)
Error Message Cause Action