Brother DCP-19010CN, Руководство пользователя

Страница: 101 / 136

Troubleshooting and routine maintenance
93
C
When you replace a belt unit with a new
one, you need to reset the belt unit
counter by completing the following
steps:
C
a
Plug the machine’s power cord back into
the electrical socket first, and reconnect
all cables. Turn on the machine.
b
Press Menu , 5 , 6 .
c
Press
a
or
b
to select
Belt Unit
.
Press OK .
d
Press 1 to reset the belt unit counter.
e
Press Stop/Exit .
Replacing the waste toner
box
C
Order No. WT-200CL
A new waste toner box can print
approximately 50,000 A4 or Letter size
single-sided pages.
WT Box End Soon message
C
WT Box End Soon
If the LCD shows
WT Box End Soon
, it
means the waste toner box is near the end of
its life. Buy a new waste toner box and have
it ready before you get a
Replace WT Box
message.
Replace WT Box message
C
When the following message appears on the
LCD, you need to replace the waste toner
box:
Replace WT Box
IMPORTANT
DO NOT reuse the waste toner box.
WARNING
DO NOT put the waste toner box into a fire.
It could explode.
Be careful not to spill the toner. DO NOT
inhale or allow it to get into your eyes.
a
Turn off the machine. Unplug the power
cord from the electrical socket.
b
Fully open the top cover by lifting up on
the handle (1).
IMPORTANT
When the scanner is open, you cannot
open the top cover.
1