Brother DCP-110C Скачать руководство пользователя страница 296

Страница: 296 / 466

8-38

Confidential

(7) MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C

If either margin is out of the specified range, press the

key twice on the machine.

DCP315CN/310CN/120C/117C/115C/110C

If either margin is out of the specified range, enter 6 twice by using the and

Set

keys on the

machine.*

(*To enter a numerical code on models having no numerical keypad, press the key several times to

display the numerical code to be entered and then press the

Set

key. Repeat this operation for each

numerical code.)

The "MEDIA SENSOR ADJ" appears again.

(8) MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C

To make the machine ready for data entry, press the

key.

DCP315CN/310CN/120C/117C/115C/110C

To make the machine ready for data entry, enter * by using the and

Set

keys.*

(9) Enter the measured value (in units of 0.1 mm) multiplied by 10.

(Example) Left: 10, Right: 13

MFC620CN/425CN/420CN/410CN/215C/210Cand FAX2440C

In this example, press

Menu/Set

, and

Menu/Set

keys.

DCP315CN/310CN/120C/117C/115C/110C

In this example, enter 1, 0, 1, and 3 by using the and

Set

keys.*

(*To enter a numerical code on models having no numerical keypad, press the key several times to

display the numerical code to be entered and then press the

Set

key. Repeat this operation for each

numerical code.)

(10) Upon completion of the entry, the machine automatically returns to the initial stage of the

maintenance mode.

Go back to step (5) and print out the margin check pattern again.

(11) Measure the left and right margins on the printout.

If both margins are within the range from 0.9 to 1.1 mm, the adjustment is completed.

TIP:

To reset the newly entered values to defaults, press the

Black Start

Mono Start

key.

Содержание DCP-110C



















































































































































































































































































































































































































































































Результаты поиска

Содержание DCP-110C

Отзывы:

Бренды по названию

Популярные бренды

Brother DCP-110C, Руководство по обслуживанию

Результаты поиска

Содержание DCP-110C

Отзывы:

Бренды по названию

Популярные бренды