Brother DA-927A, Инструкция по эксплуатации

Страница: 18 / 34

5. PREPARATION BEFORE SEWING
11
DA-927A, DA-928A
5. PREPARATION BEFORE SEWING
5-1. Needles and threads
The needle and threads to be used vary depending on sewing conditions. Select the correct ones by referring to the table below.
Needle count
Thread
Upper thread Lower thread
TV x 64#12 (Organ)
TV x 5#80 (SCHMETZ)
Spun yarn #60 Spun yarn #80
TV x 64#14 (Organ)
TV x 5#90 (SCHMETZ)
Spun yarn #60 Spun yarn #60
TV x 64#16 (Organ)
TV x 5#100 (SCHMETZ)
Spun yarn #50 Spun yarn #50
TV x 64#21(Organ)
TV x 5#130 (SCHMETZ)
Spun yarn #30 Spun yarn #30
TV x 64#22(Organ)
TV x 5#140 (SCHMETZ)
Spun yarn #20 Spun yarn #30
5-2. Installing the needles
CAUTION
Turn off the power switch before installing the needle.
However, the motor will keep turning even after the power is switched off as a result of the motor’s inertia. Wait until the
motor stops fully before starting work.
The machine may operate if the treadle is depressed by mistake, which may result in injury.
1. Turn the machine pulley until needle clamp (1) is raised to the
highest position.
2. Loosen the three set screws (2), hold the three needles (3)
with their long grooved side facing front, insert them into the
needle clamp (1) all the way, and fasten the needle with the
three set screws (2).
4259B