Brother CS-8072 Скачать руководство пользователя страница 73

Страница: 73 / 82

Before calling for service, check the following items. If the problem still persists, contact your nearest author-
ized Brother dealer.

Trouble with threads and stitches

Probable cause

1. Upper threading is not correct.

2. Upper thread is entangled.

3. Spool of thread is not correctly set.

4. Correct needle is not used.

5. Shuttle is damaged.

1. Upper thread is entangled.

2. Bobbin is not threaded properly in the

shuttle.

1. Needle is not correctly inserted.

2. Correct needle is not used.

3. The combination of fabric, thread and

needle is not correct.

4. Dust is clinging under the needle plate.

5. Upper threading is not correct.

1. Threading is not correct.

2. Correct needle is not used.

3. Combination of fabric, thread and

needle is not correct.

4. Thread tension is not correct.

1. Needle position is not correct.

2. Hook of needle threader does not fit

into the eye of the needle.

1. Upper threading is not correct.

2. Set of bobbin thread is not correct.

3. Combination of fabric, thread and

needle is not correct.

4. Presser foot holder is not correctly

installed.

Remedy

1. Re-thread upper thread.

2. Remove thread ends in the race or

shuttle.

3. Set spool of thread correctly.

4. Change to proper needle.

5. Contact service center.

1. Remove thread ends in the race or

inner shuttle.

2. Set bobbin properly and pull out the

bobbin thread.

1. Insert needle properly.

2. Change to proper needle.

3. Check the “FABRIC/THREAD/NEEDLE

COMBINATION CHART” on page 26.

4. Remove dust by cleaning with a brush.

5. Re-thread upper thread.

1. Re-thread upper and bobbin thread

correctly.

2. Change to proper needle.

3. Check the “FABRIC/THREAD/NEEDLE

COMBINATION CHART” on page 26.

4. Refer to “THREAD TENSION” on page

20.

1. Set needle at proper position using

“NEEDLE POSITION” button.

2. Set needle at proper position using

“NEEDLE POSITION” button.

1. Re-thread upper thread.

2. Set bobbin properly and pull out the

bobbin thread.

3. Check the “FABRIC/THREAD/NEEDLE

COMBINATION CHART” on page 26.

4. Install the foot holder correctly.

Symptom

1. Upper thread breaks

2. Bobbin thread breaks

3. Skipped stitches

4. Fabric puckers

5. Inability to thread needle

6. Thread tension is incorrect

TROUBLE SHOOTING

CONTENTS

BEFORE USE

SEWING

UTILITY STITCHES

MAINTENANCE

SEWING CHAR

TTERNS

(PR

OGRAMMED IN

CHINE)

Содержание CS-8072



















































































Результаты поиска

Содержание CS-8072

Отзывы:

Похожие инструкции для CS-8072

Бренды по названию

Популярные бренды

Brother CS-8072, Руководство по эксплуатации

Результаты поиска

Содержание CS-8072

Отзывы:

Похожие инструкции для CS-8072

Бренды по названию

Популярные бренды