Brother BE-438HS, Руководство по обслуживанию

Страница: 59 / 223

5. SETTING FUNCTION
KE-430HX/KE-430HS, BE-438HX/BE-438HS 48
6 Set the feed in the Y direction
Each time the or key is pressed, the work
clamp/button clamp will move by 0.05 mm.
* In Y-scale parallel movement mode, the work
clamp/button clamp will move forward when the
key is pressed, and backward when the
key is pressed.
* If the sewing pattern goes outside the sewing area as
a result of parallel movement, sewing will not be
possible.
7 Confirm the feed amount and exit the parallel
movement settings.
Touch the OK key .
・
The parallel movement amounts in the X direction and
Y direction will be confirmed, and the display will
return to the setting menu screen.
・
If you touch the back key , the menu key
or the home key without touching the
OK key, you can cancel the changes without saving
them.
NOTE:
・
If you change the program number, the X-scale or the Y-scale, the movement amount which has been stored will be
reset.
When the power switch is turned off, the movement amount which has been stored will be reset. However, if memory
switch No. 465 is set to “2”, the movement amount will remain stored and will not be reset.
For example, set to -3.00.