Programmer
92
Chapter 3 Programming with Command Function
Example of modified program
This section describes the modification method of the program using examples. Refer to "Programming" (page
105) .
Resizing pattern
The programmed pattern is resized. The example in the
left is used for explanation.
The center point (reference point) of resizing is as follows.
X coordinate : Center of the outer shape of the data
Y coordinate : Uppermost position of the data
Resizing scale between 90 to 110 % are available.
All the settings of attributes become invalid if the pattern is resized without changing the stitch length. Set the
attributes after resizing the pattern.
1
Calling data
1.
Specify the program number on the operation
panel, then press
switch to read the data.
Refer to "Using the operation panel of the main body"(page 128)
for detailed operation.
2
Resizing
1.
Press
8
8
8
, then press
M
.
Input the resizing command.
2.
Press
0
9
0
, then press
F
.
Input the resizing percentage for the X axis. Specify the
magnification percentage by 3 digits in
. 90%
is specified in the example.
3.
Press
0
9
0
, then press
M
.
Input the resizing percentage for the Y axis. Specify the
magnification percentage by 3 digits in
. 90%
is specified in the example.
4.
Input the stitch length, then press
L
.
Reference point
Содержание BAS-761
