Brother BAS-311E, Инструкция по эксплуатации

Страница: 131 / 226

Programmer 130
Chapter 3 Programming with Command Function
4
Ending program
1. Press
P
.
Double stitch
A double stitch is programmed to make two lines
with a constant width.
The example in the left is used for explanation of a
double stitch to the left of sewing direction.
When the line changes from straight to curve or curve to straight as in points B or E, be sure to press
L 7 8 9
to make a split.
More intermediate points such as points C or D will create smooth curves.
1
Programming
1. Press
P
.
The work clamp moves to the home position and the
programmer screen is displayed.
2. Move the work clamp with . Press
L
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
3. Press
2 3 0
and press
M
.
2
is the command for the double stitch. Input the
width of the double stitch in . 3.0 mm is input in the
example.
4. Input the stitch length and press
M
.
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
5. Create the program to point F in the similar
manner of curve program.
If a straight line is present as in the example, press
L 7 8 9
at the end of the line.
Sewing
width