3 - 5
Adjust
ment
Adjustment
Adjustment
Inner rotary hook plate assy position
[Standard]
When the inner rotary hook assy is pushed to the needle side (from front to rear), the
overlap between the spring plate of the inner rotary hook plate assy and the protrusion A
of the inner rotary hook assy in the front/back direction should be 2.5 to 2.8 mm.
[Adjustment]
1. Remove the needle plate assy.
2. Turn the inner rotary hook assy counterclockwise to contact the protrusion A of the
inner rotary hook assy to the spring plate, and then push the inner rotary hook assy to
the needle side (from front to rear).
3. Loosen the screw of the inner rotary hook plate assy.
4. Move the inner rotary hook plate assy to front/back, and adjust the overlap between the spring plate and the
protrusion A of the inner rotary hook assy.
5. Tighten the screw of the inner rotary hook plate assy to secure the inner rotary hook plate assy to the feed
holder.
Taptite, Pan P (S/P W) 3X12
2.5 - 2.8 mm
Spring plate
Protrusion A
Inner rotary hook plate assy
Feed holder
Inner rotary
hook assy
Inner rotary hook assy
Inner rotary hook
plate assy
Screw
Содержание 888X Series
Страница 2: ......
Страница 36: ...Basic of Disassembly 2 25 Feed unit Basic of Disassembly Basic of Disassembly Feed unit location diagram ...
Страница 67: ...5 1 5 Motor 3P supply assy 5 2 LED lead wire 5 3 Special Instructions of Wiring ...
Страница 70: ...43H15HF888X62 64 67 72 73 74 77 82 84 87 ...