Brother 882-D80 Скачать руководство пользователя | Manualshive

Страница: 2 / 180

background image

TRADEMARKS

IMPORTANT:

READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
By downloading, copying, installing or using the software you agree to this license. If you do not agree
to this license, do not download, install, copy or use the software.

Intel License Agreement For Open Source Computer Vision Library

Copyright © 2000, Intel Corporation, all rights reserved. Third party copyrights are property of their respective owners.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
• Redistribution’s of source code must retain the above copyright notice, this list of conditions and the following

disclaimer.

• Redistribution’s in binary form must reproduce the above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or other materials provided with the distribution.

• The name of Intel Corporation may not be used to endorse or promote products derived from this software

without specific prior written permission.

This software is provided by the copyright holders and contributors “as is” and any express or implied warranties,
including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are
disclaimed. In no event shall Intel or contributors be liable for any direct, indirect, incidental, special, exemplary,
or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use,
data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict
liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if
advised of the possibility of such damage.

All information provided related to future Intel products and plans is preliminary and subject to change at any time, without notice.

SD is a registered trademark or a trademark of SD-3C, LLC.
CompactFlash is a registered trademark or a trademark of Sandisk Corporation.
Memory Stick is a registered trademark or a trademark of Sony Corporation.
SmartMedia is a registered trademark or a trademark of Toshiba Corporation.
MultiMediaCard (MMC) is a registered trademark or a trademark of Infineon Technologies AG.
xD-Picture Card is a registered trademark or a trademark of Fuji Photo Film Co. Ltd.
IBM is a registered trademark or a trademark of International Business Machines Corporation.
Microsoft, Windows and Windows Vista are registered trademarks or trademarks of Microsoft Corporation.

Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs.

All other brands and product names mentioned in this manual are registered trademarks of their respective companies. However, the
explanations for markings such as

®

and ™ are not clearly described within the text.

«
1
2
3
4
...
»

Содержание 882-D80





















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 882-D80

Бренд: Tornado Страницы: 14

Бренд: Janome Страницы: 51

Бренд: Neopost Страницы: 16

Бренд: Aficio Страницы: 300

Бренд: Singer Страницы: 24

GBC WireBind W18

Бренд: GBC Страницы: 38

Бренд: Uchida Yoko Страницы: 25

Бренд: Renown Страницы: 14

Бренд: National Instruments Страницы: 12

Smoke 700 Magic

Бренд: Audibax Страницы: 2

Бренд: Innovatech Страницы: 25

Бренд: Duerkopp Adler Страницы: 77

Бренд: JUKI Страницы: 48

Бренд: JUKI Страницы: 39

SC 7900-02 M6 A

Бренд: SunStar Страницы: 47

Бренд: Everest Страницы: 71

Бренд: Consew Страницы: 8

Бренд: Consew Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды