Brother 882-D80 Скачать руководство пользователя

Страница: 155 / 180

PREPARING FOR BOBBIN WORK

to C

ate

Bobb

in W

Appendix

A-5

Wipe the bobbin case (gray) with a soft lint
free cloth to clean it.

Insert the bobbin case so that the

mark

on the bobbin case aligns with the

●

mark

on the machine.

Align the

and

●

marks.

mark on the bobbin case

●

mark on the machine

Bobbin case

Wind a decorative thread around the
bobbin by hand. After winding the bobbin
so it is filled as shown below (about 80%),
cut the thread.

For precautions on winding the bobbin for
embroidering, refer to step

of “Selecting the

Pattern” on page A-8.

Using scissors carefully trim the thread tail
as close to the bobbin as possible.

Beginning of wound thread

Note

• The bobbin case (gray) cannot be used in

any way other than bobbin work. After
creating bobbin work, refer back to the
steps in “Preparing the Bobbin Thread” on
page A-4 for removing and cleaning the
bobbin case (gray), and then reinstall the
standard bobbin case.

CAUTION

• Be sure to use the bobbin case (gray) when

creating bobbin work. Using any other bobbin
case may result in the thread becoming
tangled or damage to the machine.

• Make sure that the bobbin case is correctly

installed. If the bobbin case is incorrectly
installed, the thread may become tangled or
the machine may be damaged.

CAUTION

• Be sure to use the machine’s included bobbin

or one designed specifically for this machine.
Using any other bobbin may result in damage
or injuries.

Actual size

This model

Other models

11.5 mm (approx. 7/16 inch)

Note

• Slowly and evenly wind the thread around

the bobbin.

• For best results, wind the bobbin so the

thread is snug and not twisted.

CAUTION

• If thread extends beyond the top of the bobbin

too much, the thread may become tangled or
the needle may break.

Содержание 882-D80





















































































































































































Результаты поиска

Содержание 882-D80

Отзывы:

Похожие инструкции для 882-D80

Бренды по названию

Популярные бренды

Brother 882-D80, Руководство по эксплуатации

Результаты поиска

Содержание 882-D80

Отзывы:

Похожие инструкции для 882-D80

Бренды по названию

Популярные бренды