© 2018 BROSA AG, Tettnang, Germany
27 / 40
0656 FlexLim (Safe) system V1.00
...............................................................................................................................................................
...............................................................................................................................................................
............................................................................................................................................................
............................................................................................................................................................
Active: Yes => A CANopen sensor with the expected settings
was found.
Change? : <ENTER> => New node ID can be selected.
Important: The node ID must be configured and must not be
assigned.
For more information on changing the Node ID during servicing, see chapter
5.1.9 Service
Change example
5.1.4 Analogue outputs
Select the desired analogue output.
The minimum and maximum signals that the output channel provides are
displayed along with the physical values that represent them.
Press "OK" to change. To exit entry and return to the previous menu, press the
"ESC" key.
CANopen input 1
Current ID: 11
Free ID: 12
New ID
:
Analogue outputs:
1.
Analogue output 1
2.
Analogue output 2
Selection
Analogue output n
Min: X.Xbar = X.XmA
Max: XX.Xbar = X.XmA
Change?
