MK360
10
Setup
Unpacking*
*The MK360 can be delivered in a wooden transport case, or an aluminum Flight Case
(with additional cost).
1
Remove the top panel of the flightcase or transport case.
2
Remove the MK360 using the fabric sleeve handles.
3
Remove the 4 legs.
4
Remove the fabric sleeve from the MK360 by sliding down.
Mounting the legs
1 Place the MK360 horizontally on a soft surface.
2
Screw together top and bottom sections of each leg
3
Insert the legs into the corresponding slots on the base of the MK360,
push until hearing a click.
Lifting to position
Make sure the legs are properly inserted and secured, then lift the MK360
to its upright position and place at the desired location.
Installation
The setup process requires 2 persons.
Important
The MK360 package includes 4 fitting washers, which can be used to regulate the
height of each leg to compensate for floor imperfections.
Note
An extra Floor Fixation is available from our catalog at
broomx.com
Note