manualshive.com logo in svg

Brooktrout Technology IRAS-24A w/ T1-RBS, Инструкция по установке и справочник

Поделиться
Скачать
Brooktrout Technology IRAS-24A w/ T1-RBS Скачать руководство пользователя страница 6

vi IRAS-24A T1/ISDN Modem Card Installation and Reference Guide

Netaccess PCI-Bus Adapter Cards

❐

IRAS-8/IRAS-8A 

 provides ISDN BRI digital 

connectivity for up to 8 concurrent users at speeds up 
to 64 kbps per channel. The IRAS-8A uses Netaccess 
Anycall Technology to handle ISDN, Modem, and 
FAX.

❐

IRAS-24/48 

 provides ISDN PRI digital connectivity 

for up 23 or 46 concurrent users at speeds up to 64 
kbps per channel (T1-ISDN based services only).

❐

IRAS-30A – provides Primary Rate Interface (PRI) 
ISDN connectivity for up to thirty 64 kbps channels. 
Using Netaccess Anycall Technology, the IRAS-30A 
handles ISDN, and Modem (E1-based services only).

Product 
Features

PRI-ISDN Configuration

The IRAS-24A card has the following features when 
configured for PRI-ISDN service:

❐

Twenty-three dial in/dial out ISDN RAS ports

❐

Support for up to 23 concurrent ISDN remote access 
users per card.

❐

Supports up to twenty-three modem calls (per card), 
including V.90, V.34, and K56flex type calls.

❐

Support for four IRAS-24A cards per server.

❐

Support for V.42 or MNP 5 data compression

❐

Windows NT server support, including:

-

Configuration using the Windows NT Control 
Panel and the “Netaccess Devices” Applet.

-

Netaccess Hi-Performance COM port device 
driver for Windows NT.

-

Intelligent, on-board microprocessor.

Содержание IRAS-24A w/ T1-RBS





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды