Brooks Stairlift, Инструкция по установке и эксплуатации

Страница: 30 / 32

30
1.4 Demonstrate Stairlift to User (if applicable)
Please have the User Manual
to hand for clear explanation
Correct operation of the stairlift, troubleshooting procedures
and a description of the safety features must be demonstrated
to the end user prior to hand over.
You should observe the user using the stairlift once upwards
and once downwards AT LEAST until you are certain that they
are able to use it safely.
If the user is unable to operate the stairlift correctly and safely, the stairlift should be
removed, unless it is to be operated by an attendant. In this case, the attendant should
be present at the installation.
1.5 Maintenance (if applicable)
Ensure that the purchaser is informed of requirements for the examination,
testing and servicing of the stairlift and any associated national regulatory
requirements.
1.6 Avoiding Unsafe Installations
• The installer should not proceed with an installation if, for any reason,
it is considered unsafe.
• If the user exceeds the Safe Working Load of 127Kg, (300lbs or 20 stones)
the installation should not proceed.
• If any of the final safety checks fail, they should be repaired and re-tested before
the stairlift is put into service. Under no circumstances should any safety
feature be overridden or disabled.
• In the event that there is no wall or solid vertical surface behind the stairlift in
its intended position, or on an open plan stairway the installation should not
proceed until adequate shielding has been fitted.
• If the angle of the stairs is greater than 55º or less than 23º the installation
should not proceed.